Ctek laddare i2420 24V/20A
5 196,00 kr
Exkl. moms
Industrial 40A charger for a variety of battery types
The I2440 can be customized with different charging curves depending on battery type and application. It also records parameters from the last 200 charging cycles for compliance. I2440 has Drive Off protection and is robust with IP64 aluminum casing. The I2440 also has intelligent cable loss compensation for even faster charging and uses advanced technology for its high frequency switch mode. With conversion efficiency up to 94%, the I2440 means low CO2 emissions and lower power usage in general.
Features
Logging and saving 200 charge cycles
Multi step, fully automatic charging cycle
Charge current: 40A
Easy to read LED indicators
Automatic reconditioning for deeply discharged batteries
2-year warranty
Technical data
Battery capacity
80–1100 Ah
Back current drain*
Corresponding to less than 7 Ah/month
Back Current Drain TEXT
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
Battery voltage
24 V
Ambient storage temperature
-40 °C to +70 °C
Ambient operating temperature
-20 °C to +50 °C
Input
220–240 VAC, 50–60 Hz, 7 A
Output
28.8 V, 40 A
Start voltage
0.5 V
Ripple**
Less than 4 %
Ripple TEXT
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
Battery types
24 V:; WET; can be customized for AGM, GEL, LiFePO4
Ingress protection
IP64
Dimensions (L x W x H)
294 x 236 x 80 mm
Net weight (unit with cables)
3.0 kg
Gross weight (unit in box)
4.87 kg
Warranty
2 year
Kristianstad
Slut i lager
Stigs Center
Slut i lager
Örnsköldsvik
Slut i lager